So I finally bit the bullet and got the full version of vagcom to go with the cheapo cable ive had for ages, its version 409.1 and it seems to work just fine, but ive no idea how to actually use it and id like to do the following to my wifes pd150

miles to empty & auto locks.

Can anyone point me in the right direction please

 just checked i have immo 3 VDO cluster if that helps?, even if miles to empty cant be done how about the auto door locks?

Need VAG-TACHO(?) for miles to empty & illuminated needles. Locking as per below;

Selective Unlocking:

[Select]
[46 - Cent. Conv.] (35 - Cent. Locking for manual window cars)
[Recode - 07]
Write down the existing coding for future reference.
Enter 5-digit code from below
[Do It!]

Look at the existing Soft. Coding. If you have selective unlocking (press the unlock button on the remote once to open the driver's door, twice to open all the doors) the last digit of your coding should be an even number. To make all doors unlock, add 1 to the coding.

So, if you have a 2-door 2002 GTI that is coded for selective unlocking (00064) add one to make it 00065 so that all doors unlock with one press of the unlock button.

Lock/Unlock Horn/Flash:

 [Select]
[46 - Cent. Conv.] (35 - Cent. Locking for manual window cars)
[Adaptation - 10]
Channel (03..08)
Adaptation Value (1 = on, 0 = off)
[Save]

Channel 03 Auto Lock
Channel 04 Auto Unlock
Channel 05 Unlock, horn sounds
Channel 06 Lock, horn sounds
Channel 07 Unlock, turn signals flash
Channel 08 Lock, turn signals flash

I don't believe the 'miles to empty' is a function of Vag Com.  Think you need something called Vag-Tacho for the miles to empty mod.

Edit - Meh, beaten to it by a minute! - I must of been typing at the same time, I was just being slow researching :(

mattytdi:

Need VAG-TACHO(?) for miles to empty & illuminated needles. Locking as per below;

Selective Unlocking:

[Select]
[46 - Cent. Conv.] (35 - Cent. Locking for manual window cars)
[Recode - 07]
Write down the existing coding for future reference.
Enter 5-digit code from below
[Do It!]

Look at the existing Soft. Coding. If you have selective unlocking (press the unlock button on the remote once to open the driver's door, twice to open all the doors) the last digit of your coding should be an even number. To make all doors unlock, add 1 to the coding.

So, if you have a 2-door 2002 GTI that is coded for selective unlocking (00064) add one to make it 00065 so that all doors unlock with one press of the unlock button.

Lock/Unlock Horn/Flash:

 [Select]
[46 - Cent. Conv.] (35 - Cent. Locking for manual window cars)
[Adaptation - 10]
Channel (03..08)
Adaptation Value (1 = on, 0 = off)
[Save]

Channel 03 Auto Lock
Channel 04 Auto Unlock
Channel 05 Unlock, horn sounds
Channel 06 Lock, horn sounds
Channel 07 Unlock, turn signals flash
Channel 08 Lock, turn signals flash