To remove the speedo cluster on the Golf \ Bora:

• Disconnect the car battery throughout the procedure 
  
• First remove the trim between the cluster and the steering column by pulling it towards you to unclip it.
  
  
• Undo the two torx screws behind.
  
  
• Pull the cluster towards you to get to the blue connector.
  
  
• Undo the clip by levering it up wards to release the blue connector. The clips are easily broken so be carefull.
  
  
• Remove the blue connector from the cluster.
  
  
• Repeat the procedure on the green connector block.
  
  
• Remove the cluster.
  
• Refitting is the reverse procedure.

There is also a Youtube video on this proceedure as found by Ace AVC:

<p><a href="http://images.soapbox.msn.com/flash/soapbox1_1.swf?c=v&v=i3k2qRPAuRA">http://images.soapbox.msn.com/flash/soapbox1_1.swf?c=v&v=i3k2qRPAuRA</a></p>

View original media here: http://www.youtube.com/watch?v=i3k2qRPAuRA

If you need to seperate the cluster to fit chrome rings \ foils etc then have a read of this as well

HTH

Neil

Fantastic how too. This video and How to convinced me to go ahead and get some speedo rings and have a go.. If it wasnt for that i wouldnt have even bothered as they said remove the cluster... that to me sounds hard.. terminology i guess..

Anyway thanks for that will be a big help when im stuck half way thro!