Hi guys and girls.

I've not been on here much recently due to work commitments and a loss of love for my golf, but as the weather starts to get worse and the nights darker I thought I'd re kindle the old flame and start tinkering again with the old girl. So to celerbrate my new found love for the golf I thought I'd organise a rolling road day at CC tunings new place at Burton.

I know that there are quite a few of you on here that have had Chris re-map your cars for you when he was mobile, so thought it would be a good chance to show his new business some support and organise the event there.

I thought it would be a good time to organise the day just before christmas too, so that all you who have new toys for your cars over christmas know what it was performing like before hand, so provisional date is either Saturday the 19th or Sunday the 20st, depending on what suits people best.

Date now set for Sunday 4th April

Here's a link to the website so you can find the address- http://www.cctuning.co.uk/

I think that all makes sense, so come on guys and girls, who's up for it?

List so far-

alleyroo

davo01 (maybe not on rollers)

C7KWC

goody_gti

Nrees87

andybrwnuk

Chris 1.8T (maybe not on rollers)

jay2dogs

Domplatts

cenobytez

tak1986

Tom (Polo GTi, gear box depending)

Ben (G40)

Go on then you twisted my arm

If my car still isnt finished(which i doubt it very much wont be unless this is the year 2011)then ill still be there for moral support

 You could bring the ibiza for a play instead dude :)

Andy

Andy i am not quite sure it will dyno like this will it

alleyroo:

 You could bring the ibiza for a play instead dude :)

Andy

well if theres a booby prize for lowest output then may well do

Hopefully i'll be in on this

already,your abit early mate

Hmm it is a 350 mile round trip, but so long as nothing else has fallen off the golf, i may well be up for it :)

Oh and that's if I haven't sold this shed by then!

Nate

davo01:

already,your abit early mate

And i thought id made an ass of myself being a week early!

 bac in uk about the 20th december so mite be there. i was with chris when he was digging the hole to fit the rollers!!!!!! would be good to see them working.

 Would be good to see you there if you're back Andy. I saw the pics of the first attempt at digging, it didn't look like it went well lol.

Andy

C7KWC:

davo01:

already,your abit early mate

And i thought id made an ass of myself being a week early!

That's the first thing I thought too kyle lol. Hope you can make it dude, not seen you since inters.

Andy

Nrees87:

Hmm it is a 350 mile round trip, but so long as nothing else has fallen off the golf, i may well be up for it :)

Oh and that's if I haven't sold this shed by then!

Nate

350 miles, no problem, just take plenty of cable ties and gaffa tape lol. I take it you haven't had much luck with the golf then?

Andy

 Strange you should mention that Chris as that's what I've been looking at too, maybe a 328cl mmmmmmmm

Andy

I've been looking at 330ci Clubsports. I just can't bring myself to do it!

 I know what you mean Chris, I've said about a thousand times recently that I'm getting rid of the golf, but just can't do it lol.

Anyone got any preference if it's Saturday or Sunday? It makes no odds to me bu others may have commitments that they have to work around.

Andy

can only make it on the sunday because in germany and don't get ferry back till the friday night. I won't be to popular if i disappear on the saturday after been away for nearly 3 months!!!!!!!!!!!!!

andybrwnuk:

can only make it on the sunday because in germany and don't get ferry back till the friday night. I won't be to popular if i disappear on the saturday after been away for nearly 3 months!!!!!!!!!!!!!

You have a good point there mate lol.

I think it'd be better for Goody on Sunday too as I think he'll have football on the saturday.

Got to get back down to Chris's place now then to see if I can get more power out the old girl lol.

Andy

Sunday gets my vote

 I'm interested, what's the cost? Saturday or Sunday not fussed.

 Will have to confirm the price but I believe it will be £35 per car for three runs including a print out at the end.

Andy

Count me in when your ready to start a list, cheers.

alleyroo:

Nrees87:

Hmm it is a 350 mile round trip, but so long as nothing else has fallen off the golf, i may well be up for it :)

Oh and that's if I haven't sold this shed by then!

Nate

350 miles, no problem, just take plenty of cable ties and gaffa tape lol. I take it you haven't had much luck with the golf then?

Andy

Mate it's been nothing but trouble. But it's getting there slowly, had to cheap out and put a standard clutch & DMF on when the sachs one got destroyed by the flywheel. Not putting down nearly as much power as before, but be interesting to see what shes running at now.

Stick me down mate.

Nate

jay2dogs:

Count me in when your ready to start a list, cheers.

Nice one, your names on the list.

Andy

Nrees87:

alleyroo:

Nrees87:

Hmm it is a 350 mile round trip, but so long as nothing else has fallen off the golf, i may well be up for it :)

Oh and that's if I haven't sold this shed by then!

Nate

350 miles, no problem, just take plenty of cable ties and gaffa tape lol. I take it you haven't had much luck with the golf then?

Andy

Mate it's been nothing but trouble. But it's getting there slowly, had to cheap out and put a standard clutch & DMF on when the sachs one got destroyed by the flywheel. Not putting down nearly as much power as before, but be interesting to see what shes running at now.

Stick me down mate.

Nate

Did you still haver the standard flywheel on with the uprated clutch or was it a single mass one? Bit worrying to hear that something that expensive died so quick!!!

Names on the list anyway mate.

Andy

 Sunday is better for me, going to see Ian Brown in Brum on the Friday so.....HANGOVER!!

alleyroo:

Did you still haver the standard flywheel on with the uprated clutch or was it a single mass one? Bit worrying to hear that something that expensive died so quick!!!

Names on the list anyway mate.

Andy

Yes mate it was the standard DMF with a Sachs Organic Clutch & Pressure Plate. Got an LUK DMF & Clutch on there now, it's fine but you can tell it isn't putting down nearly as much power as the Sachs. Early next year I'll be going for a Helix Solid Mass Flywheel and Cerametallic Paddle Clutch to put the power down :D

Should have tyres with grip for this day as well :D

Nate

Bump

alleyroo:

 I thought it would be a good time to organise the day just before christmas too, so that all you who have new toys for your cars over christmas know what it was performing like before hand, so provisional date is either Saturday the 20th or Sunday the 21st, depending on what suits people best.

Saturday is the 19th, sunday 20th

 Have we got a confirmed date for this yet?

Nate

cd123:

alleyroo:

 I thought it would be a good time to organise the day just before christmas too, so that all you who have new toys for your cars over christmas know what it was performing like before hand, so provisional date is either Saturday the 20th or Sunday the 21st, depending on what suits people best.

Saturday is the 19th, sunday 20th

Doh! Well pointed out Fella.

As far as I'm aware, Sunday 20th was the more favoured date

Goody

EDIT - Just noticed that Alleyroo has put the 20th in his sig as well

 Oops, sorry for the mix up guys. Yep, Sunday the 20th is the date.

Andy